Vibration amplitude

This is expressed only with the backlash in line (especially at high speeds, when the rotating tubes to over 10 rotations / minute)

  • Backlash in bearings -> value of the remains, alignments defects, bad tooth background setting
  • Backlash in the soles -> tightening, cracks, anchoring
  • Backlash in the foundations -> Deteriorated foundations favor vibrational amplitude.

A lack of vibration is not a guarantee of quality. If the profile of the main harness is deformed, energy and frequency exists but can not be expressed with no backlash or destruction. Once a part will deteriorate in the line, the vibration will increase. The generated costs (risk of production shutdown and maintenance costs) will be much higher than a preventive decision.